Configures the delay before the receive state machine is reinstalled once the LLDP (Link Layer Discovery Protocol) transmit mode has been disabled.
| seconds | Specifies the delay that applies to the reinitialization attempt. The range is 1 to 10 seconds. |
2 seconds.
N/A.
The following command configures a reinitialization delay of 10 seconds:
configure lldp reinitialize-delay 10
This command was first available in ExtremeXOS 11.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB